News

Manufacturer: ABB
Product Type: Industrial power supply
Model: KUC755AE105
Part number: 3BHB005243R0105
Technical specification
Power supply voltage: 380-480 V AC.
Output power: 75 kW.
Output current: 150 A.
Rated speed: 0-1500 rpm.
Frequency range: 0.5-800 Hz.
Control mode: speed control, torque control, position control.
Protection function: over voltage, over current, overheating, short circuit, etc.
Operating temperature: -10 to +40°C.
Protection class: IP65.
Dimensions: 600 x 450 x 250 mm.
Weight: About 60 kg.
Functional characteristics
Precise control: Advanced vector control technology provides high precision speed and torque control to ensure smooth motor operation.
High efficiency: With high efficiency, can reduce energy consumption, save costs.
High reliability: The use of high-quality components and strict quality control standards to ensure reliable operation of products.
Multiple control modes: Support speed control, torque control and position control and other control modes.
Multiple protection functions: Overvoltage, overcurrent, overheat, short circuit and other protection functions to ensure equipment safety.
Communication interface: Equipped with standard communication interface, such as RS-485, Ethernet, etc., to facilitate communication and data exchange with the superior management system or monitoring system.
Easy configuration and maintenance: Modular design, easy installation and maintenance, user-friendly interface and rich diagnostic functions simplify the configuration and troubleshooting process of the equipment.

Manufacturer: ABB
Product type: Drive control module
Model: KUC755AE117
Part number: 3BHB005243R0117
Technical specification
Input voltage: 380-500 V AC, three-phase.
Output voltage: 0-500 V AC, three-phase.
Output frequency: 0.5-800 Hz.
Maximum current: 160 A.
Rated power: 75 kW.
Efficiency: greater than 95%.
Operating temperature: -10°C to 40°C.
Protection level: IP20.
Size: 400 mm x 400 mm x 200 mm.
Weight: 25 kg.
Functional characteristics
High precision control: Provides precise motor control to optimize equipment performance.
High reliability: The use of high-quality components to ensure long-term stable operation.
Multiple protection functions: including short-circuit protection and overcurrent protection.
Communication interface: Support a variety of communication protocols, such as Modbus RTU, Profibus DP, CAN bus, etc.
Easy maintenance: user-friendly design for easy parameter setting and fault diagnosis.
Open structure design: can interface with a variety of devices, and communicate with the host computer through the standard interface

Manufacturer: General Electric (GE)
Product Type: Relay output module
Series: Mark VI series
Technical specification
Memory: Includes 10 MB of battery-supported user memory and 10 MB of non-volatile flash user memory.
Dimensions: 230 x 170 x 45 mm (9.1 x 6.7 x 1.8 in).
Weight: 2.0 kg (4.4 lb).
Operating temperature: -30℃ to 65℃.
Technology: Surface mount.
Functional characteristics
Relay output: Provides relay output to control various electrical loads, such as switches, alarms, and equipment start-stop.
High reliability: Designed for high reliability and durability in harsh industrial environments.
Modular design: Part of the GE Mark VI series, the modular design makes it easy to install, replace and maintain.
Compatibility: Compatible with the GE Mark VI control system and other related modules, supporting system expansion and integration.
Diagnosis function: It has the basic diagnosis function to detect and report the running status and fault information of the module.
Interface: Standard industrial interface for easy connection to other devices and controllers in the system.
Various programming support: Support ladder diagram, C, structured text and functional block diagram programming.
Flexible configuration: Users can configure and program according to specific needs.

Manufacturer: General Electric (GE)
Product type: VME board
Series: Mark VIe series
Technical specification
Input signal: 0 ~ 5V, 1 ~ 5V, 0 ~ 10mA, 0 ~ 20mA, 4 ~ 20mA, 0 ~ 10V, -10V ~ +10V and other user specific specifications.
Output signal: 0 ~ 5V, 1 ~ 5V, 0 ~ 10V, -10V ~ +10V, 0 ~ 10mA, 0 ~ 20mA, 4 ~ 20mA and other user specific specifications.
Power requirements: Input voltage is 24-75V DC, usually using 24V DC backplane power supply.
Operating temperature: -20℃ to +70℃.
Communication interface: Provides a variety of communication interfaces, such as RS485 (MODBUS RTU protocol).
Functional characteristics
High reliability: Industrial components and redundant design are used to ensure the stable operation of the system.
High performance: Equipped with a high performance processor and sufficient memory to handle complex control algorithms.
Modular design: easy installation and maintenance.
Flexible configuration: Supports multiple configuration options to meet different application requirements.
Easy maintenance: Friendly user interface and rich diagnostic tools.
Data communication and sharing: When used as nodes on a reflective memory network, deterministic sharing of data can be provided between PLCS and other computing devices on a high-speed fiber optic network.
Local programming and operation: Equipped with a 2.8-inch LCD and 8 buttons, support local programming operation

Manufacturer: Compressor Controls Corporation (CCC)
Product Type: Isolated I/O module.
Technical specification
Number of channels: 32.
Input type: digital, analog.
Output type: digital, analog.
Isolation voltage: 2500 Vrms.
Signal type: DC, AC, pulse.
Operating temperature: -40°C to 85°C.
Dimensions: 170 x 100 x 40 mm.
Weight: 0.5 kg.
Functional characteristics
High-density I/O channels: Each module provides 32 I/O channels, saving installation space and cost.
High isolation voltage: The isolation voltage of 2500 Vrms ensures stable operation of the module in a high noise environment.
Support a variety of signal types: support digital, analog and pulse signals, to meet a variety of application needs.
Easy installation and maintenance: Modular design for easy installation and maintenance.
Multiple protection functions: over-current protection, over-voltage protection, short-circuit protection, etc.

The Basler A404KM-RT is a high-performance industrial camera designed for industrial automation and machine vision applications. Here are the details of the product:

Product characteristics
High resolution imaging: Provides a high resolution of 2352 x 1726 pixels, capable of capturing fine image details.
High-speed frame rate: Supports high-speed image capture up to 96 frames per second, suitable for high-speed production environments.
High Dynamic Range (HDR) : The ability to capture more image detail in high-contrast scenes.
Global shutter technology: The use of global shutter technology ensures that the entire image is captured simultaneously in a single exposure, avoiding motion blur.
Durability: Designed for industrial environments with good shock resistance and anti-interference.
Multiple interfaces: Support GigE Vision interface for easy integration with various vision systems.
Technical specification
Sensor type: CMOS.
Resolution: 2352 x 1726 pixels.
Frame rate: Up to 96 frames per second.
Interface: GigE Vision.
Lens interface: C interface or CS interface.
Trigger mode: Software trigger and hardware trigger are supported.

The VMIVME7740 VMIVME-7740-855 is a high-performance VMEbus single board computer (SBC) produced by VMIC for a wide range of industrial control and embedded applications. Here are the details of the product:

Product characteristics
High performance processor: Intel Pentium III PGA370 socket processor, processor speed up to 850MHz, with 32-bit addressing and 64-bit data bus.
Large capacity memory: Support 512MB synchronous DRAM, on-board DRAM and VME bus dual port connection to ensure efficient data transmission.
Advanced Graphics adapter: Support for high-resolution graphics and multimedia quality video with the Chips & Technology AGP graphics adapter.
Dual Ethernet controller: Equipped with dual Intel 82559 Ethernet controllers, supporting 10BaseT and 100BaseTX ports.
Rich I/O interface: including two 16550 compatible serial ports, USB connection, IDE CompactFlash (optional) and more.
VMEbus support: Support VME64 mode, including A32/A24/D32/D16/D08(EO)/MBLT64/BLT32 and other modes.
Passive radiator design: improve the stability and reliability of the system.
Technical specification
Processor: 850 MHz Pentium III FC-PGA370 slot processor.
Memory: Up to 512MB synchronous DRAM.
Size: Single slot VMEbus 6U.
Video Graphics Accelerator: 64-bit AGP SVGA.
Clock/Calendar: Battery powered.
Switches and speakers: Front panel reset switches and miniature speakers.

Motorola MVME5100 is a high-performance VME processor module designed for industrial automation, data acquisition, image processing and other applications. Here are the details of the product:

Product characteristics
High-performance processors: Typically powered by Motorola’s PowerPC 7400 or 750 series processors, they provide powerful computing power.
Rich I/O interface: Provides a variety of I/O interfaces, such as serial port, parallel port, Ethernet, SCSI, etc., easy to connect a variety of peripheral devices.
Strong scalability: Support multiple expansion slots, can install A variety of functional modules, such as A/D conversion module, digital I/O module.
VME64 support: Compatible with the VME64 standard, with higher bandwidth and greater scalability.
High reliability: Industrial components are used to ensure the stable operation of the system.
Technical specification
Processor: PowerPC 7400 or PowerPC 750.
Memory: Support 64MB, 128MB or 512MB of on-board ECC SDRAM, expandable up to 1GB.
Storage: Support IDE hard disk, CF card or PCMCIA card.
Communication interface: includes two 10/100Base-TX Ethernet interfaces and multiple RS-232/485 serial ports.
Size: 6U Euro card shape.
Operating temperature: -40℃ to +85℃.
Application field
Industrial automation: Used to build high performance industrial control systems.
Data acquisition: For high-speed data acquisition and processing.
Image processing: For real-time image processing and analysis.
Communication systems: Used to build high-performance communication systems.

Pacific Scientific 33VM52-000-29 is a high performance low inertia permanent magnet direct current (PMDC) servo motor designed for applications requiring high precision, speed and efficiency. Here are the details of the product:

Product characteristics
High accuracy: Position accuracy up to ±0.01°, speed accuracy up to ±0.01 rpm.
High dynamic performance: Rated speed up to 3000 rpm, rated torque up to 230 Nm.
Low inertia design: the rotor inertia is small, can achieve rapid acceleration and deceleration.
Multiple control modes: Support position control, speed control, torque control and trajectory control and other control modes.
Rich interfaces: Support RS232, RS485, CAN and other communication interfaces.
Strong durability: The use of Alnico V-7 magnetic steel, with good high temperature resistance and corrosion resistance.
Technical specification
Rated voltage: 18-36 V.
Rated current: Continuous current is 3.1-5.7A.
Power: 2.3 Watts.
Speed: up to 5000 RPM.
Output shaft: Circular shaft with a diameter of 6.35 mm.
Size and weight: Length 140 mm, diameter 60 mm.
Application field
Machine tool: used to control the feed shaft, spindle, etc.
Robot: Used to control the joint movement of the robot.
Packaging machinery: used to control the transport of packaging machinery, grasping and other movements.
Printing machinery: used to control the movement of paper conveying and printing of printing machinery

The IS220PDOAH1B is a digital output module in the Mark VIe series produced by General Electric (GE). Here are the details of the product:

Product characteristics
High reliability: Designed for stable operation in industrial environments to ensure system reliability.
High-speed network I/O: Supports dual 100MB full duplex Ethernet ports for fast data transfer.
Redundant system support: Supports redundant configuration to enhance system stability and reliability.
Flexible application: The digital signal of the control system can be converted into the actual physical output, such as the switch of the control valve, the motor start, etc.
Technical specification
Model: IS220PDOAH1B
Brand: GE
Series: Mark VIe
Type: Digital output module
Function: Convert digital signal to physical output.
Interface: Dual 100MB full duplex Ethernet ports.
Operating temperature range: Usually standard industrial range (-20°C to 60°C).
Mounting type: DIN rail or panel mounting.
Application field
Industrial automation control system: widely used in various industrial automation control systems.
Power industry: control systems for power plants and substations.
Petrochemical industry: Control systems for petrochemical plants.
Metallurgy: Control systems for steel smelting processes