News

The GE IS200EXCSG1A is a field conductance sensor board in the EX2100 excitation control system manufactured by General Electric (GE). It is mainly used to detect the current in the excitation system and provide the corresponding logic signal for monitoring the operating state of the excitation system.
Product characteristics
Current detection: Real-time detection of the current in the excitation system through the built-in conduction sensor.
Logical signal output: Converts the detected current information into logical signals for the convenience of other modules.
High reliability: industrial components are used, with good anti-interference and stability.
Modular design: Modular design, easy to replace and repair.
Product parameter
Input voltage: 24 VDC.
Rated current: 10 A.
Operating temperature range: -20°C to 70°C.
Storage temperature range: -40°C to 85°C.
Relative humidity: 5% to 95% (non-condensing).
Dimensions: 140 mm x 100 mm x 25 mm.
Weight: 500g.
Material: Aluminum.
Product specification
Model: IS200EXCSG1A.
Series: EX2100.
Type: Field conduction sensor board.
Function: current detection, logic signal output.
Interface: Connects to other excitation control modules

The IC697CPX928 is a high-performance central processing unit (CPU) module manufactured by GE Fanuc in the GE Fanuc Series 90-70 product line. This module plays a central role in industrial automation and control systems and is responsible for executing user programs downloaded to its memory to achieve control of field equipment and processes.
Product characteristics
High performance CPU: 80486DX4 microprocessor, speed up to 96 MHz, can quickly execute a variety of logic control and algorithms.
Large capacity memory: 6MB battery backup RAM and 256KB non-volatile user flash memory to ensure data reliability and stability.
Multiple communication interfaces: Supports multiple communication protocols such as Modbus, DeviceNet, Profibus, and TCP/IP for easy communication and integration with other devices and systems.
Modular design: It can flexibly match various I/O modules to meet different application requirements.
Self-diagnosis function: Can detect and report system faults to help users troubleshoot.
Wide operating temperature range: suitable for various industrial environments, with high reliability and stability.
Product parameter
Processor: 80486DX4 microprocessor, speed 96 MHz.
Memory: 6MB battery backup RAM and 256KB non-volatile user flash memory.
Communication interface:
1 RS-232 serial port.
2 RS-485 serial ports.
1 factory reset port.
One Ethernet port.
I/O points: Up to 12K digital I/O and 8K analog I/O are supported.
Operating voltage: 5V DC.
Operating temperature range: 0°C to 55°C (forced air cooling), 0°C to 60°C (natural cooling).
Dimensions: 115 mm x 65 mm x 30 mm.
Weight: 0.5kg.
Power supply: 24 VDC.
Processing power: A typical scan rate of 0.4µs per Boolean function supports 32-bit floating point data.

The GE H201Ti is a high-performance continuous dissolved gas analysis (DGA) monitor from the GE Hydran family. It predicts transformer failures by monitoring dissolved gases in transformer oil, such as hydrogen, carbon monoxide, acetylene and ethylene, thereby minimizing unplanned power outages.
Product characteristics
High-precision monitoring: The use of highly sensitive fuel cell sensors can accurately monitor changes in gas concentrations in the environment to ensure the accuracy of early warning signals.
Fast response: The response time is less than 30 seconds, and the change of gas concentration can be detected in time.
Multiple output modes: Provide a variety of output modes, including analog output (4-20mA), digital output (RS-485) and relay output, etc., convenient for users to select and configure according to actual needs.
Easy installation and maintenance: Compact design, simple structure, easy to install and maintain. At the same time, the equipment also provides a wealth of fault diagnosis and alarm functions, which is convenient for users to troubleshoot and maintain.
High reliability: The use of high-quality materials and advanced production processes, high reliability and stability, can be long-term stable operation in harsh environments.
Data storage: Historical data can be stored for trend analysis.
Alarm function: A variety of alarm thresholds can be set, and an alarm signal can be sent when an abnormal situation is detected.
Communication interface: Supports a variety of communication interfaces, such as Modbus® protocol communication isolation RS-485, can be connected to the upper computer system.
Product parameter
Measuring gases: hydrogen, carbon monoxide, acetylene, ethylene, etc.
Measurement range: 0-2000 ppm (volume/volume, H₂ equivalent).
Measurement accuracy: ±10% of reading ± 25 ppm (H₂ equivalent).
Response time: < 30 seconds.
Operating temperature: -40°C to +85°C.
Storage temperature: -50°C to +90°C.
Relative humidity: 0-95%RH, non-condensing.
Power supply: AC115V/230V.
Output signal: 4-20mA, RS-485, etc.
Dimensions: 100 mm x 50 mm x 30 mm.
Weight: 0.5kg

The AO2040 is a high-performance gas analyzer module from ABB in the Advance Optima family. With a modular design, the module can be freely combined into tailor-made solutions for a variety of industrial application scenarios. AO2040 is particularly suitable for measuring oxygen concentration in gases, using advanced microwave technology to ensure the accuracy and reliability of measurement results.
Product characteristics
High precision measurement: The use of advanced sensor technology to ensure accurate and reliable measurement results, the measurement accuracy is usually 1%.
Multi-component measurement: can simultaneously measure a variety of gas components, such as CO₂, H₂, H₂O, etc., to meet different application needs.
Modular design: Modular structure, easy maintenance and expansion, support a variety of measurement methods, such as non-dispersive infrared absorption method (NDIR), thermal conductivity method, electrochemical method.
Real-time monitoring: real-time monitoring of gas composition and concentration changes, timely output of measurement results.
Strong anti-interference ability: can work stably in harsh industrial environments.
Multiple communication interfaces: Support a variety of communication protocols, such as Ethernet TCP/IP, OPC server, PROFIBUS and Modbus for easy integration with other devices.
Self-check function: With self-check function, it can indicate when maintenance is needed to ensure long-term stable operation of the equipment.
Compliance with safety standards: Hazardous site approved models comply with ATEX and GOST-R, 2G, 3G and CSA Class I, Division 2 safety standards to ensure safe use in flammable gas environments.
Product parameter
Measurement accuracy: 1%.
Resolution: 1%.
Operating temperature range: -20°C to +55°C.
Power supply voltage: 220V.
Output signal type: 4-20mA or 0-10VDC.
Protection class: IP54.
Structure: wall-mounted chassis.
Product specification
Dimensions: 444mm (W) × 199mm (D) × 412 (597) mm (H).
Enclosure protection: IP20, IP54 (with junction box), IP65 (without power/display/control unit)

The PXIe-1084 is a high-performance PXI Express chassis from National Instruments (NI) for use in a variety of scientific, industrial and test applications. The chassis has several key features and a wide range of applications.
Technical specification
Power input:
Input voltage: 100 to 240 VAC, 50/60 Hz, 10 to 5 A; 100 to 120 VAC, 400 Hz, 10 A.
Operating voltage range: 90 to 264 VAC.
Rated input frequency: 50 Hz/60 Hz/400 Hz.
Operating frequency range: 47 to 440 Hz.
Efficiency: Typical value is 85%.
Overcurrent protection: internal fuse protection.
Main power off: The main power supply is disconnected through the AC power cable.
Dc output:
+5V_AUX: Maximum current 4.1 A, load regulation ±5%, maximum ripple and noise 50 mVpp.
+12 V: Maximum current 54.1A, load regulation ±5%, maximum ripple and noise 100 mVpp.
+5 V: Maximum current 51.1A, load regulation ±5%, maximum ripple and noise 50 mVpp.
+ 3.3V: Maximum current 60 A, load regulation ±5%, maximum ripple and noise 50 mVpp.
-12 V: Maximum current 4.25A, load regulation ±5%, maximum ripple and noise 50 mVpp.
Maximum total available power: 650 W.
Backplane slot current capacity:
PXI Express system controller slots: +5 V 9 A, + 3.3V 9 A, +12 V 20 A, +5 VAUX 2 A.
Hybrid peripheral slot (with PXI-5 peripheral) : +5 V 6 A, + 3.3V 6 A, +12 V 1 A.
Hybrid peripheral slot (with PXI-1 peripheral) : +5 V 6 A, + 3.3V 5 A, +12 V 6 A, -12 V 1 A, +5 VAUX 1 A.
Overcurrent protection: All outputs are protected from short circuit and overload, with automatic recovery function.
Overvoltage protection: +12 V, +5 V and + 3.3V clamp at more than 20% to 30% of the rated output voltage.
Case cooling
Module cooling: Forced air circulation (positive pressure) through three 210 CFM fans, with module air intakes located at the rear of the bottom of the chassis and exhaust ports located at the top of the chassis.
Auxiliary cooling: Forced air circulation (positive pressure) through a 70 CFM fan, side intake on the right side of the case and side exhaust on the left side of the case.
Power cooling: Forced air circulation through two integrated fans, with the power intake located behind the top of the case and the exhaust port located on the top of the case.
Minimum shelf cooling gap:
Top: 44.45 mm (1.75 in.).
Rear: 101.60 mm (4.00 in.).
Both sides: 44.45 mm (1.75 in.).

The HPC800 is a high-performance, high-capacity process controller in the ABB Symphony Plus SD family for a wide range of industrial automation and process control applications. It supports the full range of control needs from discrete and continuous control to batch and advanced control applications.
Technical specification
Processor: Based on 256 MHz, 32-bit Freescale Coldfire processor.
Memory: The HC800 and CP800 each have 64 Mbytes of RAM, 4 Mbytes of ROM, and 2 Mbytes of NVRAM.
Power supply: 24 VDC ± 10%, typical power consumption is 400 mA, support redundant power input.
Communication ports: Four 10/100 Mbps Ethernet ports that support redundant Ethernet PN800 factory networks.
Device integration: Support PROFIBUS DP, PROFIBUS PA, HART, IEC 61850, Modbus TCP, IEC 60870-5-104, DNP 3.0 and other communication protocols.
Installation method: Standard 35mm wide DIN rail horizontal installation.
Product characteristics
Multiple communication protocols support: Support a variety of communication protocols, such as Ethernet/IP, PROFINET, Modbus TCP, etc., to meet the communication needs between different devices and systems.
High-speed data transmission: It has the ability of high-speed data transmission, which can quickly transmit a large amount of data to ensure the timeliness and accuracy of data.
Easy configuration and integration: with a simple and intuitive configuration interface, users can configure the communication parameters and functions of the module through simple Settings. In addition, the module also supports a variety of mounting methods, such as rail mounting or panel mounting, so that users can integrate and install according to actual application requirements.
High reliability and stability: The redundant design ensures that the controller can still work properly in case of failure. Meets international standards to ensure the highest level of reliability and quality.
Multiple I/O support: Support SD Series I/O, Harmony Rack I/O, and S800 I/O subsystems simultaneously, providing closed-loop control of more than 5,000 I/O points with control cycles of less than 250 milliseconds.
Flexible configuration capabilities: Support up to 30,000 functional blocks and up to eight segments of tasks, each supporting execution cycle times as low as 1 millisecond.
Dedicated redundant Peer Controller communication bus: Supports dedicated redundant peer controller communication buses with update rates of less than 100 milliseconds, ensuring fast and accurate control.

ABB PNI800 is a communication interface module designed for industrial automation and control systems. It provides a variety of communication protocols and interface options that enable efficient and reliable data exchange and communication with other systems, controllers and sensors.
Technical specification
Input voltage: 24V DC.
Operating temperature: -40℃ to +85℃.
Communication interface: Ethernet, Modbus, TCP/IP.
Power consumption: 5W.
Overall dimensions: 100mm × 75mm × 35mm.
High-speed data transfer rate: up to 1Gbps.
Supported communication protocols: Ethernet/IP, PROFINET, Modbus TCP, etc.
Protection class: IP65/IP67, suitable for harsh industrial environments.
Product characteristics
Multiple communication protocols support: Support a variety of communication protocols, such as Ethernet/IP, PROFINET, Modbus TCP, etc., to meet the communication needs between different devices and systems.
High-speed data transmission: It has the ability of high-speed data transmission, which can quickly transmit a large amount of data to ensure the timeliness and accuracy of data.
Easy configuration and integration: with a simple and intuitive configuration interface, users can configure the communication parameters and functions of the module through simple Settings. In addition, the module also supports a variety of mounting methods, such as rail mounting or panel mounting, so that users can integrate and install according to actual application requirements.
High reliability and stability: high-quality hardware components and advanced communication algorithms ensure stable communication performance even under high load and network fluctuations.
Wide range of applications: suitable for a variety of industrial automation and control systems, such as production line control, energy management, building automation and other fields.

The IS420UCSCH2A is a high performance industrial automation controller module in the GE Mark VIe family, designed for industrial process control and monitoring. The module uses a dual-core 32-bit RISC processor with powerful computing power and processing speed.
Technical specification
Processor: Dual-core PowerPC 6200, main frequency 1.2GHz.
Memory: 512 MB RAM, 1 GB Flash.
Input/Output:
16 digital inputs, 24 VDC, Sink or Source.
16 digital outputs, relay, Form A, 3A, 250VAC.
Communication interface: Ethernet, Modbus, RS-232, RS-485.
Power Supply: 24 VDC.
Power consumption: 2.5W.
Operating temperature: -40°C to +70°C.
Relative humidity: 0-95%RH, non-condensing.
Dimensions: 310 mm x 230 mm x 85 mm (12.2 in x 9.06 in x 3.35 in).
Weight: 5.4kg (11.9lbs).
Protection class: IP65.
Product characteristics
High performance: Dual-core processors provide powerful processing power to meet the demands of a wide range of demanding applications.
High reliability: The redundant design ensures that the controller can still work normally in case of failure.
Easy to use: Multiple programming languages and tools are available, easy to use and maintain.
Modular design: easy to maintain and replace.
Multiple connectivity options: Connectivity options such as Ethernet and CAN are available for easy integration into existing systems.
High precision and multi-channel input: With high resolution, it is able to measure and collect fine analog signals, and provides multiple input channels, allowing multiple analog sensors or measurement points to be connected simultaneously

The ABB 5SHY4045L0006 3BHB030310R0001 is a high-performance IGCT (Integrated Gate commutated thyristor) module that belongs to ABB’s family of power electronics devices. The module has the characteristics of fast switching, high voltage, high current, etc. It is widely used in the fields of medium voltage inverter, static reactive power compensation device, DC power transmission and so on.
Technical specification
Rated voltage: 4500 V, it is also mentioned that the rated voltage is 380 V.
Rated current: 4000 A, it is also mentioned that rated current is 87 A.
Switching speed: microsecond.
On-pressure drop: Low, helps improve the efficiency of the system.
Package type: modular package.
Heat dissipation mode: water cooling.
Size: Length 220 mm, width 180 mm; It is also mentioned that the dimensions are 24.5×14.5×3.2 cm.
Weight: 8 kg; It is also mentioned that the weight is about 3.7 kg.
Junction temperature: 175°C.
Switching loss: 4.0J.
On-off loss: 2.0V.
Switching frequency: 20 kHz.
Protection level: IP68.

The IS420UCSBH4A is a high-performance Universal Control System Board (UCSB) controller module in the GE Mark VIe family, which is primarily used in industrial automation and process control systems. It plays a core role in the control logic management of the gas turbine or steam turbine, and realizes the automatic control of the equipment.
Technical specification
Processor: 1066 MHz Intel EP80579 microprocessor.
Memory: 256 MB DDR2 SDRAM.
Operating system: QNX Neutrino real-time multitasking operating system.
Input voltage: 18-36 V DC.
Operating temperature: -22°C to 65°C (-10°F to 149°F).
Communication interfaces: IONet (I/O network), Ethernet, Modbus, PROFIBUS, etc.
Installation mode: Panel installation.
Dimensions: Approximately 225mm x 144mm x 96mm.
Weight: About 2.5 kg.
Product characteristics
High performance: The 1066 MHz Intel EP80579 processor provides fast scanning speed and powerful data processing capabilities.
High reliability: Redundant design and advanced fault detection and diagnosis function ensure the stable operation of the system.
Modular design: easy to install and maintain, support a variety of I/O modules and communication interfaces.
User-friendly interface: Provides high-resolution color display and keyboard for easy operation and monitoring.
Anti-interference ability: It has the characteristics of anti-vibration, anti-electromagnetic interference and durability, suitable for harsh industrial environments